General Information:
This single-channel HP 6850 Network GC system has similar performance as the Agilent 6890N GC, but is only half as wide. The six-button, two line local interface provides run control and status information and comes network-ready with a built-in LAN communications interface.
Split/Splitless Capillary Inlet
-Maximum temperature: 375 °C
-Pressure range: 0–100 psi (0–150 psi optional)
-Accepts columns from 50-µm id to 530-µm id
– Pressure pulse mode / Gas saver mode
-Total flow ranges through the inlet: He, 20 to 1,000; H2, 26 to 1,000; N2, 20 to 200 mL/min
-Split ratio may be adjusted electronically without affecting column flow or head pressure
Flame Ionization Detector (FID)
-Maximum temperature: 375 °C
– Automatic ignition
-Flame-out detection and reignition
-Minimum detectable: <5 pg carbon/s as propane using N2 carrier and a 0.29-mm id jet
-Linear dynamic range: 107 (±10%) • Full range auto scaling
-Data acquisition rate: up to 200 Hz
-Flows: air, 0 to 800; hydrogen, 0 to 100; make-up (He or N2), 0 to 100 mL/min
Column Oven
-Dimensions: 202 × 200 × 105 mm (HWD)
-Oven power is turned off automatically when the lid is opened
-Column basket diameter:130 mm
-Standard: 5 °C above ambient to 350 °C.
-Temperature setpoint resolution: 1 °C
-Column bleed compensation
-Maximum run time: 999.99 min
This Agilent 6850 Series II Network GC System with GC PAL is in great condition It has been tested at SpectraLab Scientific.
A 90 day warranty is included.
