Specifications
Dimensions and Weights
- Size: 53 cm (h) x 66 cm (w) x 56 cm (d)
- Weight: 43 kg
Environmental Conditions
- Operating temperatures: 10°C to 40°C
- Operating humidity (relative): 5% to 95%
- Line voltage requirements: 101V, 120V, 230V (±10% nominal)
Column Oven
- Dimensions: 28 cm (w) x 20 cm (d) x 28 cm (h)
- Temperature range: ambient +4°C to 450°C
- With liquid N2: -99°C to 450°C
- With liquid CO2: -65°C to 450°C
- Temperature program ramps/holds: 7/8
- Maximum temperature ramp rate: 100°C/min for all voltages
- Cool down rate: 400°C to 50°C in 4.5minutes
- Temperature set-point resolution: 1°C
Injector Options
- Maximum injectors: three operating concurrently
- Pneumatics: manual or electronic flow control (EFC)
- Columns: capillary columns standard with optional packed column adapter
Injectors:
- CP-1177Split/Splitless
- 1079 Programmable Temperature Vaporizing (PTV)
- 1061 Flash Megabore/Packed
- 1041 On-Column Megabore/Packed
CP-1177 Split/Splitless
- Pressure range: 0-100 psi
- Total flow: 500 rrillrnin at 10 psi
- Maximum temperature: 450 °C
- Split range: 1-10,000 (column dependent)
1079 Programmable Temperature Vaporizing (PTV)
- Pressure range: 0-100 psi
- Total flow: 500 mL/min at 10 psi
Temperature range
- -99°C to 450°C liquid N2
- -65°C to 450°C liquid CO2
- Maximum temperature ramp rate: 180°C/min
- Temperature ramps: 4
- Split range: 1-10,000 (column dependent)
- Operational modes
- Temperature ramped splitless
- Coldon-column
- Large Volurne Injection
- Split and splitless
- ChromatoProbe solid sample introduction: optional
1061 Flash Megabore/Packed
- Pressure range: 0-100 psi
Total Flow:
- 50 mL/min (Type 3 EFC)
- 500mL/min (Type 4 EFC)
- Maximum temperature: 450 °C
1041 On-Column Megabore/Packed
- Pressure range: 0-100 psi
Total Flow:
- 50 mL/min (Type 3 EFC)
- 500mL/min (Type 4 EFC)
- Maximum temperature: 450 °C
FID
- Maximum temperature: 450 °C
- Detectivity: 2 pg C/see
- Linear dynamic range: 107
- Patented ceramic -Flame tip: standard
- Flame-out detection/auto re-ignition: standard
Combi PAL AutoSampler
- Sample trays: two standard and expandable to four
- Tray types: 98 x 2mL vials; 200 x 1 mL vials; 32 x 10 m 1120 mL vials; and 96-well plates
- Dual and duplicate mode: standard
- Internal standard addition: standard
- Modes of Operation: liquid, standard; heated headspace, optional;and SPME, optional
- Sample heating and cooling: standard
- Optional modules:additional sample trays, micro-well plate holders, wach station, SPME fiberbake-out station, dilutor, barcode readers, and flowcell
This refurbished Varian CP-3800 GC System with Dual FID and CTC Combi PAL is in great condition. It has been tested at SpectraLab Scientific.
A 90 day warranty is included.
Installation and extended warranty available upon request.