|
Specification |
Description |
|
Channels |
1-5 independent |
|
Degassing Process
|
Gas permeation through a fluoropolymer membrane |
|
Maximum Recommended Flow Rate |
3.0 mL/min. |
|
Pressure Drop |
1.37 mm Hg/mL/min.
|
|
Degassing Capacity
|
~25% dissolved gases remaining in 60:40 MeOH/Water mixture at 1 mL/min. |
|
Dead Volume |
~480 microliters per channel for standard channel
|
|
Materials contacting solvents |
PEEK, Glass-filled PTFE, Teflon AF |
|
Power: |
|
|
Power requirement if using supplied AC Adapter
|
100 to 240 VAC (±10%), 1A, 50 to 60 Hz (±3 Hz)
|
|
Power Requirement if not using supplied AC Adapter
|
15 to 24 VDC at 0.85 A maximum (0.5 A typical)
|
|
Wall Sockets |
4 supplied with AC Adapter, interchangeable: North America/Japan, U.K., Continental Europe, Australia
|
|
Installation Over-Voltage Category |
II |
|
Validation Output: |
|
|
Signal |
5 mVDC / 1 mm Hg absolute from 20 to 800 mm Hg (0.100 VDC at 20 mm Hg; 4.000 VDC at 800 mm Hg)
|
|
Accuracy |
±1.0% of reading ±0.010 VDC from 20 to 800 mm Hg
|
|
Operating Conditions:
|
|
|
Ambient Temperature |
10 to 35 ºC
|
|
Ambient Relative Humidity (RH) |
20 to 80 % RH (without condensation)
|
|
Altitude |
0 to 2000 Meters
|
|
Indoor vs. Outdoor Use |
Indoor |
|
Pollution Degree |
2 |
|
Storage Conditions:
|
|
|
Ambient temperature |
-20 to +60 ºC
|
|
Ambient Relative Humidity |
20 to 80% RH (without condensation)
|
|
Altitude |
0 to 12000 M |
This refurbished Perkin Elmer Series 200 Vacuum Degasser is in great condition. It has been tested at SpectraLab Scientific.
A 90 day warranty is included.
