This refurbished Shimadzu SIL-HTc Autosampler is in great condition. It has been tested at SpectraLab Scientific.
A 90 day warranty is included.
| Specification | |
| Sample injection system | Total sample injection, variable sample injection system (zero sample loss during injection) |
| Settable range of injection volumes |
0.1 to 100 µL (standard), or 1 to 2000 µL (option) (0.1µL steps from 0.1 to 0.9µL, and 1µL steps from 1 to 2000 µL) |
| Sample processing capability |
With 1-mL vials: 350 With 1.5-mL vials: 140 with 4-mL vials:100 With micro plates: 4 (96 wells: 284, 284 wells: 1536) with deep well plates: 4 (96 wells: 284, 284 wells: 1536) |
| Injection volume repeatability | RSD: 0.3% max. (at 10µL injection) |
| Cross contamination | 0.01% max. (for analysis of naphthalene) |
| Injection volume accuracy | Less than +/- 1% (50µL) |
| Injection volume accuracy correction | Possible |
| No. of injections | 1-99 times per sample |
| Setting of analysis time | 0.01 – 9999.9 (0.1 minute increments to 999.99 min., 0.1 minutes increments over 1000 min.) |
| Number of steps for injection conditions | Max 102 steps |
| Sample suction speed | 0.1-15 µL/sec (0.1µL/s step for 0.1-0.9 µL/sec., 1µL/s step for over1 µL/sec.) |
| Rinsing liquid suction speed | 1-35 µL/sec/ (1µL/s step) |
| Maximum pressure | Max. 20.0 Mpa (standard pippings of sample flowpath is PEEK) |
| Sample cooler | Direct cooling method (at a setting of 4 deg. C, room temperature must be less than 30 deg. Cand humidity less than 70%) |
| Temperature setting range | 4 to 40 deg. (cooling down to 4 deg. C for room temperature up to 30 deg. C and humidity to 70%) |
| Operating ambient temperature range | 4 to 35 deg. C |
